Are your rear rockshaft bushings worn
out, leaving
you with a lot of sloppy play?
I am now offering new rockshaft bushings for
Cub lift units. These are made
of DuPont Delrin™, a high strength polymer that is replacing steel components in
of DuPont Delrin™, a high strength polymer that is replacing steel components in
many of today’s automobiles. Delrin is highly
regarded for its high strength, great
wear resistance and self lubricating properties.
These new bushings will take
all the looseness caused by worn bushings out of
your rockshaft.
These will be offered in complete sets. A set consists of all four pieces needed
These will be offered in complete sets. A set consists of all four pieces needed
to repair the rear rockshaft.
These replace IH part numbers 514548R1 and 514549R1.
These are no longer available from the dealer, so if you are restoring your
These replace IH part numbers 514548R1 and 514549R1.
These are no longer available from the dealer, so if you are restoring your
Cub and want a good, tight rockshaft as they were
from the factory, this is it.
These only fit the rear rockshaft for hydraulic lifts.
These only fit the rear rockshaft for hydraulic lifts.
They will not work with the manual lift that has
been altered to work with the hydraulic system.
...
...
$30.00 (US Dollars) per set (two upper & two lower pieces per set)
plus $6.00 shipping (Continental US).
Up to two sets will ship for $6.00
......
$30.00 (US Dollars) per set (two upper & two lower pieces per set)
plus $6.00 shipping (Continental US).
Up to two sets will ship for $6.00
Click here
for more info
►► Please Read! ◄◄
These will only eliminate looseness caused by worn bushings.
They will not resolve issues with a worn rockshaft bar or bracket.
►► Please Read! ◄◄
These will only eliminate looseness caused by worn bushings.
They will not resolve issues with a worn rockshaft bar or bracket.